SimPie by Cyntech

SimPiDocsThis  is a colourful, ready built  easy to use GPIO interface from Cyntech

It has 3 switches, a mufti-coloured RGB LED and a built-in buzzer

To use it just set the AddOn variable to SimPie and then you have easy methods of accessing it

Broadcasts available
Red,Green and Blue [On/Off/High/Low] e.g broadcast RedOnwill make the LED light up Red

[All] [On/Off/High/Low] e.g broadcast AllOn will make all LEDs and the buzzer come on.

[Buzzer] ]On/Off/High/Low] e.g broadcast BuzzerOn

You can use variables instead e.g Set Blue On will make the LED turn Blue

A;sp you can use set PowerRed/Green/Blue to 0..100 to vary the brightness of the colour

There are three switches and theya acccessed as sensor values red,amber and green.  On if pressed, off if not pressed


Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s